Wire Tensioner, Fence Adjuster | Set of 10 | Accessible. From 2 mm wire diameter

Wire tensioner - fence adjustment

These fence tensioners are available in three sizes and are ideal for supporting a wide range of fences using a tension wire. Regardless of whether it is mesh fence, deer fence, grazing fence or other wire fence for the garden, the tensioners allow effortless tightening of support wires in different wire thicknesses to stabilize the net.

Without this practical support for the fence mesh, the tension wires will easily sink. With the help of the wire tensioner, you can ensure that your wire fence is ideally supported. They are also ideal for post-tensioning as each fence tensioner can be adjusted over time if necessary. Wire tensioners also make it easier to attach bar downs and cross wires that act as climbing aids for hedges. The buckles are available in two colours, galvanized and green, so that they can be visually matched with your existing fence.

Attaching the wire tensioner

Assembly is quick and easy:

1. Fasten this end
2. Attach this end of the fence tensioner to a post or post at the end of your fence using baling wire.
3. Pass the tensioning wire through this hole.
4. Pull the support wire through this hole and tighten it by hand first.
5. Now use a wrench or pliers to further tighten the thread. Once the wire has taken hold, remove the excess with a pair of pliers.
6. Continue to tighten the wire until it is tight. The wire will click into place every 90 degrees.

• Quantity: 10 pcs.
• Material: Steel
• Colors: Galvanized, green
• Thickness: 2.5 - 2.8 mm
• Material thickness galvanized: 1.80 mm
• Material thickness green: 1.85 mm
• Different sizes: 100mm (suitable for wire diameter 2.0-2.75mm), 115mm (suitable for wire diameter 2.75-3.8mm), 120mm (suitable for wire diameter 3.8mm)
• Weight Galvanized: 0.078 kg (100 mm), 0.093 kg (115 mm), 0.128 kg (120 mm)
• Weight Green: 0.08kg (100mm), 0.095kg (115mm), 0.13kg (120mm)